双涂层光纤应变传感器的理论与实验研究

对带有聚合物涂敷层和缓冲层的光纤应变传感器的力学特性进行了研究，建立了双涂层光纤与基体材料相互作用的线弹性理论模型.理论研究表明：在小半径近似条件下，双涂层光纤的力学传递特性决定于涂覆层和缓冲层的弹性模量的相对值；当缓冲层的弹性模量远大于涂覆层时，其作用可忽略.实验中，将光纤传感器埋入基体材料内部，利用白光干涉应变测量方法，对平均应变传递系数进行了实验研究.实验结果与理论仿真具有较好的一致性.     

Numerical method for the simultaneous determination of the hydraulic properties of unsaturated porous media

This paper presents a numerical algorithm for solving the inverse coefficient problem for nonlinear parabolic equations. This problem arises in simultaneous determination of the hydraulic properties of unsaturated porous media from a simple outflow experiment. The novel feature of the method is that it is not based on output least squares. In this method, the unknown functions are represented as polygons (continuous and piecewise linear functions) every new linear pieces that are determined in each time step by using information based only on previous time intervals. The results of some numerical experiments are displayed.     

光参量啁啾脉冲饱和放大的增益稳定性

 光参量啁啾脉冲放大（OPCPA）在饱和放大区存在一个增益稳定点，据此设计了一个输出稳定的三级OPCPA系统；第一、二、三级分别选用准相位匹配的周期极化钛氧磷酸钾（PPKTP）晶体、LBO晶体和KDP晶体作为增益介质。饱和放大时，增益随泵浦光强度变化时的增益输出稳定性明显改善，在泵浦光强度抖动低于6%的情况下，各级光参量放大器OPA输出的增益抖动小于1%。前级采用准相位匹配的PPKTP晶体作为增益介质，在远低于破坏阈值的30MW/cm²的泵浦功率密度下，可得到2×10⁵的饱和放大增益和20%的能量转换效率。     

关于体上分块矩阵的群逆

本文利用分块矩阵方法．研究了体上两个矩阵乘积的群逆的存在性及表示形式，给出了体上两个矩阵乘积群逆存在的充分必要条件和表示形式．并且在一定条件下．给出了体上分块矩阵的群逆存在性及表示形式．     

Synchronization of complex dynamical networks with time delays

In the present paper, two kinds of dynamical complex networks are considered. The first is that elements of every node have different time delays but all nodes in such networks have the same time-delay vector. The second is that different nodes have different time-delay vectors, and the elements of each node also have different time delays. Corresponding synchronization theorems are established. Numerical examples show the efficiency of the derived theorems.     

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Chitosan/magnetite nanocomposite was synthesized induced by magnetic field via in situ hybridization in ambient condition. Results of XRD patterns and TEM micrographs indicated that magnetite particles with 10–20 nm were dispersed in chitosan homogeneously. An interesting result is that magnetite nanoparticles were assembled to form chain-like structures under the influence of the external magnetic field, which mimics the magnetite chains inside of magnetotatic bacteria. The saturated magnetization (Ms) of nano-magnetite in chitosan was 50.54 emu/g, which is as high as 54% of bulk magnetite. The remanence (Mr) and coercivity (Hc) were 4 emu/g and14.8 Oe, respectively, which indicated that magnetite nanoparticles were superparamagnetic. The key of route is that a pre-precipitated chitosan hydrogel membrane, used as chemical reactor, which controlled the precipitation of chitosan precipitation and in situ transformation of magnetite from the precursor simultaneously in the magnetic field environment.     

Entangled States Based on Two Coherent States 3π/2 out of Phase

Entangled states based on two coherent states 3π/2 out of phase with each other, i.e. ｜α〉 and e^iФ｜-iα〉, as well as on a special state with a relative phase Ф = ｜α｜^2, are constructed. By analysing the amount of entanglement it is evident that entangled states based on this special state can be used as an excellent resource for quantum teleportation. It is also revealed that these entangled states possess some nonclassical features.     

Optical properties of cadmium sulfide nanocrystal film prepared by electrochemical synthesis at liquid-liquid interface

Dendritic nanocrystalline CdS film was deposited at liquid-liquid interface of surfactants and an electrolyte containing 4 mmol L⁻¹ cadmium chloride (CdCl₂) and 16 mmol L⁻¹ thioacetamide (CH₃CSNH₂) with an initial pH value of 5 at 15 °C by electrochemical synthesis. The nanofilm was characterized by transmission electron microscopy (TEM), field emission scanning electron microscope (FE-SEM), atomic force microscopy (AFM), ultraviolet visible (UV-vis) absorption spectroscopy and fluorescence spectroscopy. The surface morphology and particle size of the nanofilm were investigated by AFM, SEM and TEM, and the crystalline size was 30-50 nm. The thickness of the nanofilm calculated by optical absorption spectrum was 80 nm. The microstructure and composition of the nanofilm was investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), showing its polycrystalline structure consisting of CdS and Cd. Optical properties of the nanofilm were investigated systematically by UV-vis absorption and fluorescence spectroscopy. A λ_onset blue shift compared with bulk CdS was observed in the absorption spectra. Fluorescence spectra of the nanofilm indicated that the CdS nanofilm emitted blue and green light. The nanocomposites film electrode will bring about anodic photocurrent during illumination, showing that the transfer of cavities produces photocurrent.     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

Nonvolatile photorefractive holographic recording in Sc:Ce:Cu:LiNbO3

In this paper experimental studies of nonvolatile photorefractive holographic recording in Ce:Cu:LiNbO₃ crystals doped with Sc(0,1,2,3 mol%) were carried out. The Sc:Ce:Cu:LiNbO₃ crystals were grown by the Czochralski method and oxidized in Nb₂O₅ powders. The nonvolatile holographic recording in Sc:Ce:Cu:LiNbO₃ crystals was realized by the two-photon fixed method. We found that the recording time of Sc:Ce:Cu:LiNbO₃ crystal became shorter with the increase of Sc doping concentration, especially doping with Sc(3 mol%), which exceeds the so-called threshold, and there was little loss of nonvolatile diffraction efficiencies between Sc(3 mol%):Ce:Cu:LiNbO₃ and Ce:Cu:LiNbO₃ crystals.